Hammerite Direct to Rust Primer and Undercoat: 1 x 400ml: Beige
Product Description
Hammerite No.1 Rustbeater provides a high build finish to heavily pitted areas of rust and prevents new rust forming
Application Description
Shake the can vigorously using a vertical motion until the agitator ball is heard, then for a further 3 minutes. When touch dry (15 minutes) apply a further 2-3 coats, allowing 30 minutes between coats.
Do not overspray or sagging might occur. A topcoat may be applied after a minimum of 4 hours. For best results allow 24 hours.
Between coats invert can and spray for 2 seconds to avoid blockages.